Tool list #1

Airframe

  1. Hand grinder with 4” cutting wheel - 1/16’ thick cut off disk (Makita or Hitachi are good brands)

  2. Drill Index (115-piece drill set): numbered drills, lettered drills, and fractional drills plus will need a couple extra 3/16, .25, and 5/16 bits  (Travers Tool Co. recommended, but they’re expensive)

  3. Reamer (1/4”), and straight flutes - .250, 3/16, and 5/16

  4. Center Punch

  5. Scribe

  6. Ball Peen hammer (light, not heavy)

  7. Clamps (vice grip type with big jaws) large and small ones

  8. 2” and 4” C-clamps (some of each)

  9. Hand clamps

  10. Air grinder - hand held (will need air compressor)

    • Carbide bur tools: ball end & pointed end

    • Rubber type tool to attach sanding disk

    • Round rubber barrel shaped tool for sandpaper that slips over (drum)

  11. 1” wide belt sander (table type with what looks like 1” x 30” sanding belt)

  12. Bench grinder with wheels - ˝ HP

Specifications  FAQ  Price  Contact  Flying Helicycle's  Factory  Shows  Pictures/Video  Builders Home

Eagle R&D 2512 Caldwell Blvd. Nampa, Idaho USA   Office & Fax 208-466-4120   Factory 208-461-2567

Hit Counter